- July 8, 2019
0
- Ch341ser Driver
- Ch341ser Driver How To Install Windows
- Ch341ser Driver Windows 10 64 Bit
- Ch341ser Driver Mac
CH341SER Driver The latest official driver of chip CH340/CH341, including windows, android, linux and macOS. Both the CH340 and CH341 can realize the function of USB to serial port, and their drivers are the same. This project always points to the lastest chip driver. How to Install CH341SER Arduino Clone Driver in Linux CH341SERLINUX In Raspbian for Raspberry Pi Run the following commands in the CLI/Terminal when using Raspbian on a Raspberry Pi.
Clone Arduino & driver chip CH340, CH340G, CH341
Category : RESOURCES
The CH340/CH341 chip is used by a number of Arduino compatible cards to provide USB connectivity.
Many operating systems do not recognize these chip natively because they lack the drivers and consequently we have an error due to lack of drivers.
The lack of this driver does not allow you to communicate with the hardware platforms and to use the Arduino development software.
No panic, driver installation is very easy!
The driver must be downloaded from the official (Chinese) website.
Once the unzip of the package has been executed, it is possible to proceed with the update of the driver for the device CH340/CH341 and equivalent (download driver only for your OS):
WINDOWS 32/64bit (version: 3.4 – 2016/09/27)
Drivers in the Windows OS are missing, you need to download and install them.
LINUX 32/64bit (version: 1.5 – 2018/03/18)
The drivers are integrated into different Linux distributions. If the device is not recognized, download the Linux CH340/CH341 driver.
MAC OS 32/64bit (version: 1.5 – 2018/07/05)
This driver is for MacOS Sierra/High Sierra. Do not install the drivers for the Mojave, because it seems that the latest versions are equipped with the built CH340/CH341 support.
Installation
• Unplug any CH34* devices.
• Unload the old drivers if running:
• sudo kext unload /Library/Extensions/usbserial.kext
• sudo kext unload /System/Library/Extensions/usb.kext
• Remove the old driver by issuing one of the following commands (depending on your installation):
• sudo rm -rf /System/Library/Extensions/usb.kext
• sudo rm -rf /Library/Extensions/usbserial.kext
• Double-click on the CH34x_Install_V1.3.pkg file and install (no need to reboot)
• Instead of rebooting, you can force quit Installer after it completes.
• Load the new driver:
• sudo kextload /Library/Extensions/usbserial.kext
• Plug in your device. It should now be listed under the /dev directory. Examples:
• /dev/cu.wchusbserial1410
• /dev/cu.wchusbserial1420
ANDROID (version: 1.5 – 2018/03/18)
Enjoy!
- July 8, 2019
0
Clone Arduino & driver chip CH340, CH340G, CH341
Category : RESOURCES
The CH340/CH341 chip is used by a number of Arduino compatible cards to provide USB connectivity.
Many operating systems do not recognize these chip natively because they lack the drivers and consequently we have an error due to lack of drivers.
The lack of this driver does not allow you to communicate with the hardware platforms and to use the Arduino development software.
No panic, driver installation is very easy!
Ch341ser Driver
The driver must be downloaded from the official (Chinese) website.
Once the unzip of the package has been executed, it is possible to proceed with the update of the driver for the device CH340/CH341 and equivalent (download driver only for your OS):
WINDOWS 32/64bit (version: 3.4 – 2016/09/27)
Drivers in the Windows OS are missing, you need to download and install them.
LINUX 32/64bit (version: 1.5 – 2018/03/18)
The drivers are integrated into different Linux distributions. If the device is not recognized, download the Linux CH340/CH341 driver.
MAC OS 32/64bit (version: 1.5 – 2018/07/05)
This driver is for MacOS Sierra/High Sierra. Do not install the drivers for the Mojave, because it seems that the latest versions are equipped with the built CH340/CH341 support.
Ch341ser Driver How To Install Windows
Installation
• Unplug any CH34* devices.
• Unload the old drivers if running:
• sudo kext unload /Library/Extensions/usbserial.kext
• sudo kext unload /System/Library/Extensions/usb.kext
• Remove the old driver by issuing one of the following commands (depending on your installation):
• sudo rm -rf /System/Library/Extensions/usb.kext
• sudo rm -rf /Library/Extensions/usbserial.kext
• Double-click on the CH34x_Install_V1.3.pkg file and install (no need to reboot)
• Instead of rebooting, you can force quit Installer after it completes.
• Load the new driver:
• sudo kextload /Library/Extensions/usbserial.kext
• Plug in your device. It should now be listed under the /dev directory. Examples:
• /dev/cu.wchusbserial1410
• /dev/cu.wchusbserial1420
Ch341ser Driver Windows 10 64 Bit
ANDROID (version: 1.5 – 2018/03/18)
Ch341ser Driver Mac
Enjoy!